Product ID:KUTWELL 40 (MIL-I-24453A)
MSDS Date:06/01/1989
FSC:6850
NIIN:00-139-5318
MSDS Number: BDBLK

Emergency Phone: 713-870-6000

Cage: 29700

Telephone: 201-945-9400

Cage: 82925

HYDROTREATED HEAVY NAPHTHENIC DISTILLATE, PETROLEUM

CAS: 64742-52-5

RTECS: PY8035000

Fraction By Weight: >75%

ADDITIVES

Fraction By Weight: <25%

Effects of Overexposure:SKIN:REPEATD/PROLNGD CONTC CAUSES
IRRIT;EYES:CAUSE IRRITATION;INHAL:DICOMFORT.DIZZINSS;ING:LOW TOX

First Aid:INHALE:REMOVE TO FRESH AIR, GIVE CPR/O*2 IF
NEED;EYES/SKIN:FLUSH W LG AMTS H*2O FOR 15 MIN;INGEST:RINSE MOUTH;
GET MEDICAL ATTENTION FOR EYES, BREATHING DIFFICULTY, OR OTHER
SYMPTOMS OF OVEREXPOSURE.

Flash Point:315F(157C)COC
Lower Limits:0.9
Upper Limits:7.0
Extinguishing Media:FOAM, DRY CHEM, CO*2, WATER FOG OR SPRAY
Fire Fighting Procedures:USE SUPPLD-AIR RESP IN ENCLOSD SPACES.USE
WATER TO COOL CNTN
Unusual Fire/Explosion Hazard:DO NOT MIX OR STORE W/STRONG OXIDANTS
LIKE LIQ CHLORINE OR CONC OXYGEN

Spill Release Procedures:RECOVER FREE LIQ, ADD ABSORBENT, SAND, EARTH,
SAWDUST, ETC TO SPILL AREA. KEEP PETROLEUM PROD OUT OF SEWERS &
WATERCOURSES BY DIKING, IMPOUNDING. ADVISE AUTH IF PROD HAS
ENTERED OR MAY ENTER SEWERS, WATERCOURSES, EXTENSIVE LAND AREAS.

Handling and Storage Precautions:KEEP CNTNRS CLOSED WHEN NOT IN USE. DO
NOT HANDLE OR STORE NEAR HEAT, SPARKS, FLAME OR STRONG OXIDANTS. DO
NOT CONTAM CUTTING FLUID CIRCUL SYS.
Other Precautions:AVOID BRTHNG OIL MIST. REMOVE OIL-SOAKED CLOTHING &
LAUNDER BEFORE REUSE. DISCARD OIL-SOAKED SHOES. WASH SKIN
THOROUGHLY W/SOAP & WATER.

Respiratory Protection:NORMALLY NOT NEEDED. USE SUPP-AIR RESP PROT IN
CONFINED SPACES
Ventilation:LOCAL EXHST TO CAPTURE FUMES, VAPORS. PROVIDE >60FPM.
Protective Gloves:CHEM RESIST
Eye Protection:SPLASH GOGGLES/FACE SHLD
Other Protective Equipment:CHEM RESIST APRON OR OTHER CLOTHING TO AVOID
CNTCT
Supplemental Safety and Health
MSDS FM MFR DATED:7/1/85; ITEM OF MIL-I-24453-SHIPS;EXXON'S PRODUCT
CODE:350040-03777

HCC:N1
Boiling Pt:B.P. Text:520F(271 C)
Vapor Pres:<.1
Vapor Density:>5
Spec Gravity:0.90
Evaporation Rate & Reference:<0.01(BU-ACETAT@1)
Solubility in Water:MODERATE
Appearance and Odor:CLEAR, DARK AMBER COLOR, NEARLY ODORLESS PETROL

Stability Indicator/Materials to Avoid:YES
STRONG OXIDANTS, LIQ CHLORNE, CONC O*2, SODIUM HYPOCHLORITE
Stability Condition to Avoid:HEAT, IGNITION SOURCES
Hazardous Decomposition Products:FUMES,SMOKE,CARBON MONOXIDE,SULFUR
DIOXIDE IN INCOMP COMBUST

Waste Disposal Methods:ASSURE CONFORMITY W/APPLICABLE DISPOSAL REG.
DISPOSE OF ABSORBED MATL AT APPRVD WASTE DISPOSAL SITE OR FACILITY.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.